Published by the team behind MultiGroupPoster. Our pick is our own product — how this site works.

Safety guide

Facebook Group Posting Limits and Delays

Updated · By the MultiGroupPoster team

Short answer

Facebook publishes no official per-day limit for group posts, so use conservative numbers: MultiGroupPoster's guidance is 50–100 posts a day for accounts older than 12 months, about 40 for 6–12 months, and fewer for newer accounts, with random pauses of several minutes between posts and no identical repeats to the same group.

This guide is for anyone setting up a Facebook group poster for the first time, or anyone who has already had a run stopped and wants to know what went wrong. It explains the numbers that matter — posts per day, delay between posts, repeats per group — and gives a four-week plan to scale up without pushing your luck.

One caveat up front: Facebook does not publish a "safe" number. Everything below is based on the published defaults of group posting tools (mainly MultiGroupPoster, which this site's publisher makes) and on the logic of behaving like a careful human. Nobody can promise an account will never be limited.

The four numbers that matter

Number What it controls Conservative setting
Posts per day Total group posts from one account in 24 hours Depends on account age (see below); never above 200
Delay between posts Gap between one group post and the next Random, several minutes
Batch size Posts sent before a longer pause 1–3
Repeat window How soon the same post can go to the same group Not within 20 hours; in practice, much longer

Posts per day, by account age

MultiGroupPoster's posting limits documentation gives this guidance:

Account age Suggested daily posts
Older than 12 months 50–100
6–12 months About 40
Under 6 months Fewer — start small and build up

On top of that, the extension stops at 200 posts a day on every plan and shows a "Safety limit check" if you try to go further. The cap is a safety net, not a recommendation; the guidance range is much lower for a reason.

Delay between posts

The default in MultiGroupPoster is a random pause of about 3–6 minutes after every 1–3 posts. As the run gets longer, the pause grows:

Posts already sent in the run Pause multiplier Effective pause
1–9 1× ~3–6 min
10–29 1.5× ~4.5–9 min
30–59 2.5× ~7.5–15 min
60–99 4× ~12–24 min
100+ 6× ~18–36 min

Runs with more than 60 groups also add about 4–7 seconds before every post. Custom pacing allows a wait of 1–60 minutes after every 1–50 posts, randomized if you choose.

Other tools describe their delays differently — SimplePoster, for example, advertises "±40% random jitter delays". Whatever the tool, look for two things: delays measured in minutes rather than seconds, and randomness.

The math: how long a run really takes

Slow pacing means runs take time. With default settings, a rough estimate:

  • 10 groups: about 15–30 minutes
  • 30 groups: about 1–2 hours
  • 60 groups: several hours

That's the point. A run of 60 posts in 10 minutes looks nothing like a person; a run spread over an afternoon looks much more like one. Start long runs in the morning, or split the list across days.

A four-week ramp-up plan

Use this if your account is new to posting in groups, or if you've had a warning recently.

Week Groups per run Runs per week Max posts per day Notes
1 5–10 2 10 Default pacing. Read every group's rules first.
2 10–15 3 20 Add Spintax to the opening line and call to action.
3 15–25 3 30–40 Remove groups that declined or failed twice.
4+ 25–50 3–5 Up to your age band Rotate content; never send the identical post twice in a row.

Accounts older than 12 months can move faster, but the same principles apply. The goal is a steady pattern, not a burst.

Worked example: 120 groups, one established account

Say your account is three years old and you have 120 relevant groups. The guidance band for an account older than 12 months is 50–100 posts a day, so posting to all 120 in one day would exceed it. A better plan:

  1. Split the list. Divide the 120 groups into three lists of 40 (MultiGroupPoster can split a list into up to 50 parts).
  2. One list per day. Monday list A, Wednesday list B, Friday list C. Each day stays at 40 posts — well inside the band.
  3. Rotate the content. Write three post versions so list A gets version 1 on Monday, version 2 next week, and so on.
  4. Start early. With default pacing, 40 posts takes a few hours. Start in the morning so the run finishes during the day.
  5. Review on Saturday. Prune failed or declined groups and replace them with new relevant ones.

Every group still hears from you once a week, and no single day looks like a burst.

Signals that you should slow down

  • A run stops with an error from Facebook partway through.
  • Facebook shows a warning about your activity, or temporarily blocks posting.
  • Many posts land in "pending" or get declined in groups that used to approve you.
  • Members report or hide your posts.

When any of these happen: stop for the day, cut your daily volume by half for a week, lengthen delays, and review which groups and texts triggered problems. Our guide to avoiding Facebook jail covers recovery in more detail.

Delay is not the only lever

Pacing helps, but it can't fix posting the wrong thing to the wrong place. Three things reduce problems as much as delays do:

  1. Relevance. Post only where the content clearly fits the group's purpose.
  2. Variation. Use Spintax and alternate images so no two groups get identical posts.
  3. Rules. Respect promo days, link bans and approval requirements — see posts that get approved.

Settings checklist before every big run

  • ☐ Daily total for this account is inside its age band
  • ☐ Default or slower pacing (no "speed up" tweaks)
  • ☐ At least 2–3 Spintax variations in the text
  • ☐ Images rotate or vary where possible
  • ☐ List contains only groups whose rules you've checked
  • ☐ Nothing in this list received the same post in the last few days

MultiGroupPoster's Pre-Flight Safety Check reviews several of these before a run starts — the number of groups, the time between posts and whether the text varies. It checks the run, not your account. See the MultiGroupPoster profile for the full list of controls.

Sources

  1. MultiGroupPoster docs: limits and pacing
  2. MultiGroupPoster docs: FAQ
  3. MultiGroupPoster terms (no account-safety warranty)
  4. SimplePoster website (jitter delays)

Frequently asked questions

Does Facebook publish an official daily limit for group posts?

No public number exists. The figures used by posting tools are their own conservative guidance. Treat any number as a ceiling, not a target, and adjust if Facebook warns you.

Is a fixed 2-minute delay safer than a random 1–4 minute delay?

A random delay with a similar average is generally preferable, because perfectly even gaps are a machine-like pattern. Most group posters randomize delays for this reason.

Why does my account's age change the safe number?

Tool vendors base their guidance on it. MultiGroupPoster suggests 50–100 posts a day for accounts over 12 months old but about 40 for 6–12 months and fewer for newer accounts, so ramp up gradually on a new account.

What should I do if a run is stopped partway through?

Stop for the day. Don't restart immediately. MultiGroupPoster offers a 'Post the rest tomorrow' option after Facebook stops a run, which is the right instinct: let the account rest, then continue at a slower pace.

Cite this page

MultiGroupPoster. “Facebook Group Posting Limits and Delays.” Best Facebook Group Poster, updated 2026-11-17. https://bestfacebookgroupposter.com/guides/posting-limits-and-delays/